|
|
Fuel Delivery (Rails
and Secondary Injection)
BUY NOW
The Extrudabody Quick-Mount Fuel Rail System is the most flexible
rail setup on the market. It has been designed to integrate perfectly
with our throttle bodies, but also is easily customizable for almost any
application. The -6AN size is perfect the vast majority of performance
engines.
Our fuel rail bridges the gap between ready-made "plug and play" fuel rails
made for specific applications and "raw stock" fuel rail that requires you to
custom fabricate your entire mounting system. If you are developing an engine
that isn't supported by the mass-market China-made fuel rails or you just want
something new and different, our rail is for you.
PRICING:
(All Rails are ready for end fittings, but not
drilled for Fuel Injectors)
Secondary
Fuel Injector Mounting Bridges:
-
Injector Mounting Bridges (shown at right) are used for all-out
performance applications to maximize both low
end torque and high end horsepower.
- Dual Stage Injectors allow more time for fuel to
emulsify into the air charge, and can be used as
supplement mounts where 1 set of injectors are
not enough.
- Bridge comes with your choice of
15mm, 25mm, 35mm, or 45mm Stand-offs to adjust
injector to horn distance.
- NOTE: 25mm and 45mm
Standoffs are shown.
- Dimensions: 75mm x 18mm x
10mm. Mounting Center to Center: 63mm. Injector
Bridges can be used with Extrudabody Fuel Rails
and other manufacturers'
products as well. Please
contact us for questions.
- For a great article and staged fuel
injection, download a PDF from the Australian
magazine RACE
here.
Fuel Rail Specs and Info:
FLEXIBILITY:
- Choose 8", 18" or 24" standard lengths or
pick any length from 2" to 24"
- Drill your own injector holes for maximum
flexibility, or let us do it for you for a small
fee
- Mount to your engine with our T-Slot system
with infinitely adjustable placement of mounting
struts
- Use any standard Bosch-style fuel injector
and even use Pico-style injectors
 PERFORMANCE:
QUALITY:
- All parts are Made in the USA to
exacting specifications, unlike most
aftermarket fuel rails which are sourced from
China. If they don't say Made in USA, they
probably aren't
- Extrusion tolerances are held to a very
tight +/- 0.005" (standard extrusion tolerance
is +/- 0.018")
LOOKS:
- The combination of clear anodized
aluminum with red anodized hardware
and stainless nuts and bolts creates a look fit
for the best shows
- Polished fuel rails are available for an even
better look
- Non-corroding finishes means the looks will
last
COST:
- A complete fuel rail system starts at just
$60 (standard lengths, drill your own injector
holes)
- Choose any custom length for an additional $25
- Let us drill the injector holes for you for
an additional $35
Learn more in our Technical Section and buy
now in our Online Store
Fuel Rail Specifications:
- Rail Material: Heat treated 6063 aluminum (T6 hardness), anodized for
durability
- Nut & Bolt Material: Stainless Steel
- Dimensions: 8, 18 and 24" length
- Fittings: -6AN, red anodized 6061 T6 aluminum
- Fuel Injectors: Standard Bosch-style injectors or Pico-style
injectors are both possible
|
